进口电动高压调节阀W4F6CP

点击图片查看原图

品牌：	德国沃德WODE
口径：	DN15-DN300
材质：	A105、F304、F316
压力：	0-75Mpa
单价：	面议
起订：	1 台
供货总量：	100 台
发货期限：	自买家付款之日起 3 天内发货
所在地：	北京
有效期至：	长期有效
最后更新：	2022-02-24 09:52
浏览次数：	1885

公司基本资料信息

详细说明

进口电动高压调节阀W4F6CP

electric pressure control valve W4F6CP

品牌：德国沃德WODE

Brand: Germany WODE

关键词：进口电动超高压调节阀，进口电动超高压差调节阀，进口电厂高温高压调节阀，进口75Mpa调节阀，进口Class4500LB调节阀

一、概述Overview

W4F6CP型进口电动高压调节阀又称抗气蚀、低噪声、高压差调节阀、是德国沃德工程技术人员为满足50-600MW火力发电机组配套而开发的新型调节阀，该系列产品经过多次的改进，不继完善，具有新颖性和先进性。

W4F6CP Type import electric pressure control valve, also known as anti-cavitation and low noise, high-pressure differential regulating valve, which is the development of engineering and technical personnel of GER WODE Company To meet the 50-600MW thermal power generating units supporting.The series has a new and advanced after many improvements and improve.

二、用途Use

安装在电厂锅炉高压差管道上作流量、压力调节用

Installed in power plant boiler pipe high-pressure differential for regulating flow or pressure.

三、结构特征Structure

1、本系列产品采用完合拆装式结构，操作力距小，阀腔内件（包括阀座、

阀芯、节流组件、密封件等）均可从并阀腔取出，维护保养十分方便，阀体不需从管道上割下，可长期使用。

This series of products together with complete disassembly structure, operation torque is small, the valve chamber pieces (including the seat,

Valve, throttle assemblies, seals, etc.) can be removed from the chamber and the valve, maintenance is very convenient, valve body do not have to be cut from the pipeline,can be long-term use

2、阀芯为柱塞体平衡式结构，操作力距小，调节灵敏高。

Spool is balanced plunger body structure, operating torque, the adjustment of high sensitivity.

3、节流组件由多孔板集流式节流环yu套筒式节流套组成，且配以均流罩，

因此具有小流量高压差无气蚀、大流量、调节性能好，流体排出梳流无噪音的综合特性，完全满足了高压差等苛刻工况的要求，有效地实现了高温、高压差流体的流量调节控制，可调性好，调节精度高。

Throttling component from the porous flow restrictor plate set ring set with integral throttle sleeve, and supported by both flow hood, therefore, no pressure differential with low flow cavitation, the flow, regulated performance, drain fluid flow without noise comb, fully meet the harsh conditions of high pressure and poor requirements, effective implementation of the high temperature and pressure differential control of fluid flow control, adjustable, good regulation and high precision.

4、节流环可在阀门工作行程的55%之内，实现多级减压节流

Cutting ring can be achieved in multi-stage vacuum throttle valve work within 55% of stroke.

5、阀芯和阀座密封面堆焊司钛莱硬质合金，抗冲刷、耐蚀。

Core and valve seat sealing surface is welded titanium Levin Secretary carbide, anti-erosion and corrosion resistance.

四、阀体Body

组成部件Components

1、阀体2、齿形垫片3、阀塞4、阀芯组件（含阀座、迷宫节流件、压笼）5、齿形垫片6、阀杆7、阀盖8、压圈9、螺母10、螺柱11、下填料12、中填料13、上填料14、隔环15、压套16、压板17、螺母18、螺栓

1、Body 2、Profile gasket 3、Plug 4、Valve assembly (including valve seat, cutting pieces of the maze, pressure cage) 5、Profile gasket 6、Stem, 7、valve cover, 8、the pressure ring 9、Nut, 10、stud, 11、under the filler, 12、the filler, 13、the filler 14、ring, 15、pressure sets, 16、clips, 17、nuts, 18、bolts